Skip to content

Managing IT and ITC Projects Final Exam

Managing IT and ITC Projects Final Exam

Now that you have finished reviewing all course material, it’s time to take the final exam. You must score 70% or higher to pass this exam. You will have an unlimited number of attempts to pass and there is no time limit for each attempt. Once you pass, you will receive a certificate of completion. Good luck!

Time limit: 0

Quiz Summary

0 of 20 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 20 Questions answered correctly

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

You must score 70% or higher to pass this exam. You get unlimited attempts to pass. Please review the course material and attempt this exam again. Once you pass, you will receive a certificate of completion. Click the Restart Quiz button to take this quiz again.
Congratulations – You Passed the Course Exam. Click the “Continue” button to view your certificate of completion.

Review
Answered
Correct
Incorrect

Question 1 of 20

1. Question

Which of the following are the individuals responsible for managing project processes and applying knowledge, skills, tools and techniques to complete project activities?

Project manager
Correct Incorrect Correct answer

Program manager
Correct Incorrect Correct answer

Functional manager
Correct Incorrect Correct answer

Project sponsor
Correct Incorrect Correct answer
Question 2 of 20

2. Question

What are the two processes in the initiating process group?

Develop project charter and identify stakeholders
Correct Incorrect Correct answer

Develop project charter and develop business case
Correct Incorrect Correct answer

Develop project charter and develop project scope
Correct Incorrect Correct answer

Develop business case and identify stakeholders
Correct Incorrect Correct answer
Question 3 of 20

3. Question

What is the process of identifying the people, groups or organizations that may impact or are impacted by the project?

Identify stakeholders
Correct Incorrect Correct answer

Create the project team
Correct Incorrect Correct answer

Identify functional managers within the organization
Correct Incorrect Correct answer

Identify subject matter experts
Correct Incorrect Correct answer
Question 4 of 20

4. Question

The communication cabling systems found in commercial and industrial buildings are planned and organized to support different communications systems and are designed to support an average life cycle of ___ years.

3
Correct Incorrect Correct answer

5
Correct Incorrect Correct answer

7
Correct Incorrect Correct answer

10
Correct Incorrect Correct answer
Question 5 of 20

5. Question

A distributor room can be sized to serve equipment outlets or usable floor space, when the number of equipment outlets is unknown. One distributor room is designed to serve up to ______ of usable floor space.

100 sq. m (1,000 sq. ft.)
Correct Incorrect Correct answer

1000 sq. m (10,000 sq. ft.)
Correct Incorrect Correct answer

1500 sq. m (15,000 sq. ft.)
Correct Incorrect Correct answer

2000 sq. m (20,000 sq. ft.)
Correct Incorrect Correct answer
Question 6 of 20

6. Question

The temperature of an Equipment Room must stay within what operating range?

55 to 75 degrees
Correct Incorrect Correct answer

64 to 81 degrees
Correct Incorrect Correct answer

68 to 85 degrees
Correct Incorrect Correct answer

72 to 100 degrees
Correct Incorrect Correct answer
Question 7 of 20

7. Question

Industry cabling standards require what grade of plywood to be used for DR backboards?

A/A
Correct Incorrect Correct answer

A/B
Correct Incorrect Correct answer

A/C
Correct Incorrect Correct answer

A/D
Correct Incorrect Correct answer
Question 8 of 20

8. Question

When performing core drilling in a telecommunications room, all core holes should be placed on the right side of the room.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer
Question 9 of 20

9. Question

What size conduit is used for sleeves between vertically aligned distributor rooms?

Trade size 1
Correct Incorrect Correct answer

Trade size 2
Correct Incorrect Correct answer

Trade size 3
Correct Incorrect Correct answer

Trade size 4
Correct Incorrect Correct answer
Question 10 of 20

10. Question

The maximum fill for a conduit is based on the internal conduit size and the outside diameter of the cables to be installed in the conduit. The total capacity of a conduit is reduced by _____ for each 90 degree bend in the conduit run.

10%
Correct Incorrect Correct answer

15%
Correct Incorrect Correct answer

20%
Correct Incorrect Correct answer

30%
Correct Incorrect Correct answer
Question 11 of 20

11. Question

What is the minimum size slot that should be installed in a distributor room that serves a usable floor space of 25,001 to 50,000 sq. m (250,001 to 500,000 sq. ft.)?

15 by 22.5 cm (6 by 9 inches)
Correct Incorrect Correct answer

15 by 45 cm (6 by 18 inches)
Correct Incorrect Correct answer

22.5 by 50 cm (9 by 20 inches)
Correct Incorrect Correct answer

30 by 50 cm (12 by 20 inches)
Correct Incorrect Correct answer
Question 12 of 20

12. Question

What is the maximum distance supported for multimode fiber cable in the backbone subsystem from the MC to IC?

1000 m (3280 ft.)
Correct Incorrect Correct answer

1500 m (4920 ft.)
Correct Incorrect Correct answer

1700 m (5576 ft.)
Correct Incorrect Correct answer

2000 m (6560 ft.)
Correct Incorrect Correct answer
Question 13 of 20

13. Question

The size of the intrabuilding backbone cables to install in a building will depend on the type of applications that must be supported inside of a building and the location of the network equipment inside of a building.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer
Question 14 of 20

14. Question

Industry standards recommend installed a pull box for each _____ of conduit.

30 m (100 ft.)
Correct Incorrect Correct answer

50 m (164 ft.)
Correct Incorrect Correct answer

90 m (295 ft.)
Correct Incorrect Correct answer

100 m (328 ft.)
Correct Incorrect Correct answer
Question 15 of 20

15. Question

The minimum bend radius of a conduit that has an internal diameter of more than 50 mm (2 in.) is ______ times the internal diameter of the conduit.

2
Correct Incorrect Correct answer

5
Correct Incorrect Correct answer

10
Correct Incorrect Correct answer

20
Correct Incorrect Correct answer
Question 16 of 20

16. Question

Local building codes typically specify minimum cable supports at ______ to _______ intervals along the entire cable run.

1.0 m to 1.2 m (3 to 4 ft.)
Correct Incorrect Correct answer

1.2 m to 1.5 m (4 to 5 ft.)
Correct Incorrect Correct answer

1.5 m to 1.8 m (5 to 6 ft.)
Correct Incorrect Correct answer

1.8 m to 2.1 m (6 to 7 ft.)
Correct Incorrect Correct answer
Question 17 of 20

17. Question

Industry cabling standards require that all cables installed in the horizontal cabling subsystem be installed in a _______ topology.

Physical star
Correct Incorrect Correct answer

Bus
Correct Incorrect Correct answer

Ring
Correct Incorrect Correct answer

Hierarchical star
Correct Incorrect Correct answer
Question 18 of 20

18. Question

The first step for creating an action plan is to perform which planning activity?

Create the work breakdown structure (WBS)
Correct Incorrect Correct answer

Define activities
Correct Incorrect Correct answer

Sequence activities
Correct Incorrect Correct answer

Estimate activity durations
Correct Incorrect Correct answer
Question 19 of 20

19. Question

Which of the following is the process of performing the work defined in the project plan to achieve the project’s deliverables?

Direct and manage project work
Correct Incorrect Correct answer

Manage quality
Correct Incorrect Correct answer

Monitor and control project work
Correct Incorrect Correct answer

Perform integrated change control
Correct Incorrect Correct answer
Question 20 of 20

20. Question

For an IT cabling infrastructure project, closing the project includes all of the following activities except:

Taking the customer on a final walk-through
Correct Incorrect Correct answer

Delivering project documentation
Correct Incorrect Correct answer

Obtain final customer sign-off
Correct Incorrect Correct answer

Making a final presentation to project stakeholders
Correct Incorrect Correct answer

Login

Accessing this course requires a login. Please enter your credentials below!

Username or Email Address

Password

Remember Me

Lost Your Password?

Register

Don't have an account? Register one!

Register an Account

Username

Email

Registration confirmation will be emailed to you.