Commercial Cabling Systems – Testing, Troubleshooting and Certification Final Exam
Now that you have finished reviewing all course material, it’s time to take the final exam. You must score 70% or higher to pass this exam. You will have an unlimited number of attempts to pass and there is no time limit for each attempt. Once you pass, you will receive a certificate of completion. Good luck!
Quiz Summary
0 of 20 Questions completed
Questions:
Information
You have already completed the quiz before. Hence you can not start it again.
Quiz is loading…
You must sign in or sign up to start the quiz.
You must first complete the following:
Results
Results
0 of 20 Questions answered correctly
Time has elapsed
You have reached 0 of 0 point(s), (0)
Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)
Categories
- Not categorized 0%
-
You must score 70% or higher to pass this exam. You get unlimited attempts to pass. Please review the course material and attempt this exam again. Once you pass, you will receive a certificate of completion. Click the Restart Quiz button to take this quiz again.
-
Congratulations – You Passed the Course Exam. Click the “Continue” button to view your certificate of completion.
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- Current
- Review
- Answered
- Correct
- Incorrect
-
Question 1 of 20
1. Question
The process of testing communication cables includes all of the following steps EXCEPT:
-
Question 2 of 20
2. Question
_____ are simple testing devices that are only used to either identify or locate communication cables.
-
Question 3 of 20
3. Question
Category 6 balanced twisted pair cable is rated up to a frequency of ____ MHz.
-
Question 4 of 20
4. Question
The maximum cabling distance for all types of cables installed in the permanent link is ______.
-
Question 5 of 20
5. Question
What is the The maximum cable distances for Balanced Twisted Pair cable from the main cross- connect (MC) to a TR?
-
Question 6 of 20
6. Question
To accurately calculate the distance of the cable, the speed of the transmitted signal traveling in the cable must be known. The speed that a signal travels in a cable is known as the _____.
-
Question 7 of 20
7. Question
The formula for determining the ACR is:
-
Question 8 of 20
8. Question
_______ is a measure of the total crosstalk energy that can be measured on a non-active cable pair when more than one pair is active or being used simultaneously.
-
Question 9 of 20
9. Question
Which of the following is NOT a cause of a low NEXT rating on a balanced twisted pair cable?
-
Question 10 of 20
10. Question
What is the primary standard for defining performance specifications for fiber cable and components?
-
Question 11 of 20
11. Question
What is the standard for measurement for fiber or cable attenuation using an OTDR tester?
-
Question 12 of 20
12. Question
Singlemode optical fiber cables should be tested at both ______ and ______ wavelengths.
-
Question 13 of 20
13. Question
The ANSI/TIA-568-C.3 standard specifies that singlemode optical fiber cable shall exhibit a maximum of _____ dB/km at 1310 and 1550 nm for tight buffer cable.
-
Question 14 of 20
14. Question
What is the maximum length for an optical fiber horizontal channel specified by the ANSI/TIA-568-C.3 standard?
-
Question 15 of 20
15. Question
Multimode optical fiber backbone link segments should be installed in a hierarchical star topology and limited to a maximum of _____ from the main cross-connect to a horizontal cross-connect.
-
Question 16 of 20
16. Question
Singlemode optical fiber backbone link segments should be installed in a hierarchical star topology and limited to a maximum distance of ______ from the main cross-connect to an intermediate cross-connect.
-
Question 17 of 20
17. Question
Visual cable tracers and fault locators can be used on optical link segments that are up to _____ km in length.
-
Question 18 of 20
18. Question
Optical attenuation or power loss is given in what unit of measure?
-
Question 19 of 20
19. Question
What is the name of the backscatter caused by connectors and splices in a fiber optic link?
-
Question 20 of 20
20. Question
What is the name for reflections on the OTDR trace that shows up beyond the end of the cable?
